HOME

Workflow & app guides

How can I transfer my files without access to renderBeamer? (FTP)
How can I transfer my files without access to renderBeamer? (FTP)
Missing LightWave plugin in shelf
Missing LightWave plugin in shelf
3ds Max V-Ray
3ds Max V-Ray
General guide
General workflow
General workflow
General guide
Maya Arnold
Maya Arnold
Modo Native
Modo Native
3ds Max Corona
3ds Max Corona
Maya Redshift
Maya Redshift
Modo V-Ray
Modo V-Ray
Cinema 4D
Cinema 4D full workflow
Cinema 4D full workflow
Cinema 4D
Maya V-Ray
Maya V-Ray
Blender
Blender full workflow
Blender full workflow
Blender
SketchUp
SketchUp full workflow
SketchUp full workflow
SketchUp
V-Ray Scene
V-Ray standalone full workflow
V-Ray standalone full workflow
V-Ray Scene
After Effects
After Effects full workflow (deprecated)
After Effects full workflow (deprecated)
After Effects
LightWave 3D
LightWave full workflow
LightWave full workflow
LightWave 3D
Redshift standalone (.rs)
Redshift standalone (.rs) full workflow
Redshift standalone (.rs) full workflow
Redshift standalone (.rs)

Articles

FAQ

3ds Max Corona

3ds Max Corona Guide

1. Download and install

Log in to Web Manager (web dashboard) at https://app.garagefarm.net and download our renderBeamer app for your operating system.

Web Manager downloads panel

Install the renderBeamer app and start it. Once renderBeamer is done with the installation process, you need to choose the default download directory. This path will be used as the main output place for all your renders. Next, just log in using the account ID you received or your account email. Please keep in mind that the app should always be running in the background whenever uploading a project or downloading rendered frames.

renderBeamer startup windows - default download directory on the left, and login panel on the right

Once renderBeamer is installed and you’re logged in, you’ll see the Plugins panel. Plugins installation panel should automatically open after the first renderBeamer startup. You can also open it anytime you need to install additional plugins for your 3D apps.

renderBeamer 3D app plugins installation panel

Note

Please keep in mind that each 3D app (DCC) you use needs to have a plugin installed to properly connect to and render on our farm.

2. Prepare the scene (global setup for all 3ds Max render engines)

Open your scene in 3ds Max and prepare it for rendering on a render farm. 

  • Set the right resolution, file format with output path and cameras to render.
  • Set required render range. You can select between all available options (single, active time segment, range or selected frames). If you are using a multi-camera scene you can set different frame ranges for each camera in our plugin.
  • Make sure that your scene does not contain any missing assets and caches.
  • Animated textures - animation files (avi/mp4/etc) are not a valid option, also .mov files cannot be used. Please make it a frame sequence (jpg\png or so) and connect as an image sequence. You can use the ".ifl" sequence in 3ds Max.
  • External plugins - we support quite a lot of 3ds Max plugins, however, if you are using some atypical add-on, we may need some time to run a test with the plugin & our network rendering system. Also, we check for plugins used in the scene and compare them with our system. In the case when we don't support some plugins, you will be informed about it automatically upon sending the project. You may also contact our support team via chat from your web manager.
  • Outputs - they need to be configured the same way as rendering on a local machine. This includes 3ds Max main output, V-Ray frame buffer, V-Ray RAW image, Corona & Mental Ray outputs and any kind of render elements.
  • Render region should be off, however, should you require it, you can turn it on and omit our plugin’s warning.
  • Multiple cameras in one scene - our plugin supports this setup for stills, camera animation and full animation
  • Scene name and output paths should not contain any non-standard system characters like / \ " % # ? or language-specific non-ASCII characters like the Cyrillic or Korean alphabet. If your scene contains such characters, it's always best to change them. If our plugin detects any special characters, it will convert them to "_" including output paths.

Note

Each render engine operates on different render options and features. Therefore, our plugin opens an appropriate GUI for you based on the render engine selected as “Production”.

3. Use the plugin - setting the mode (Corona)

Once the project is prepared, please locate the renderBeamer menu and hit Beam it up to open the plugin window. In the plugin UI you can prepare your scene for farm rendering.

Plugin UI for Corona render engine. On the top - mode selection menu. Next sampling settings and GI setup. In the middle - camera and render range setup. At the bottom - output format settings.

First, you’ll need to start with selecting one of the available render modes: Render as is (Default), Camera animation - bake and render, Still image - render / bake and render. Each render mode is specifically designed for a different kind of scene setup, so please make sure that you select a mode suitable for the type of scene you’re going to render.

Plugin render modes for Corona render engine:

  • Render as is (Default) - In this mode your scene renders "as it is". It's useful for scenes with already pre-cached GI or for shots which do not need GI caching. Also, it can be used for scene testing purposes. We do not provide any GI caching options in this mode. Render as is doesn't have any additional settings either.
  • Camera animation - bake and render - This mode should be used for camera animated scenes. Our plugin creates two jobs in this mode. The first one for the GI caching - called the "bake" scene. The second job is the rendering scene. The rendering scene uses pre-cached GI maps from the first job. With camera animation mode, GI caching is done using the bake step range. The default baking step value is 10, so if your scene is starting at 0 and ending at frame 100, you will receive 11 frames cached (including the first and last frame). 
Additional settings for Camera Animation mode
  • Still Image - render / bake and render - This is our custom distributed rendering system. It’s designed especially for high-resolution still shots. Depending on which settings you choose, submitting your scene with this mode creates two or three jobs - GI cache, render and merge. If you already have pre-cached GI, you can turn off the “Cache GI on farm” switch, and connect your GI maps via the “from file”. They will be uploaded with your scene and used for rendering. Turning off cache switch will force our plugin to forward 2 jobs to the farm render queue - render and merge. When the cache GI switch is on you will receive 3 jobs - GI cache, render and merge. Still Image mode renders your scene with “strips” (horizontal or vertical render regions). After the strip render job is completed, strips are then stitched to one final resolution frame in a merge job. Please keep in mind that the usage of non-cacheable GI setting sometimes can cause issues with GI rendering. For example, with PathTracking+PathTracking setup you can receive visible seams where the strips connect as each of the render nodes will be calculating GI from scratch when rendering the strip.

Note

We strongly suggest to render high-resolution still shots only in “Still image” mode. Also, it's good to cache GI on the farm side (Cache GI on farm switch). With farm-side GI caching you can be 100% sure that the GI map is correctly cached, saved and used for the final rendering.

Note

Every render region (strip) will be rendered on one render node, so with higher resolutions and better quality, we strongly suggest using 20 or more strips. More strips will render the image faster (not always the case for smaller images). Also, your resolution must be divisible by the number of strips you want to use. Otherwise, the number of strips will be limited.

4. Use the plugin - render settings (Corona)

Once the mode is correctly selected, you can proceed to the next part - the render settings.

Progressive render limits - You can set the render quality with Pass limit, Time limit or just with Noise level.

Note

Setting Time limit to 1 second will not allow the plugin to send the scene, as 1 second time setup for rendering is reserved to GI caching procedure.

Global Illumination setup - As for progressive rendering limits, GI settings are also read from your scene and mirrored here. If you are using UHD cache or 4k cache and have pre-cached GI maps, please remember to turn off the bake switch in our plugin and connect them to your scene using “from file” mode before sending the project to the farm. 

All render settings displayed in the plugin are extracted from your scene, however, if you still want to change something, you can do it here, without going back and using 3ds Max render settings panels.

5. Use the plugin - camera settings (Corona)

Once you set quality controls & GI setup, you can proceed to Camera and render range settings. Here you can see all your renderable cameras. When you have multi camera scenes, you can set multiple frame ranges for each camera all at once. Each camera in the scene will be rendered as a separate render job - including GI caching. If you want to test your scene, you should put some render step value in the camera frame ranges. For example, if a scene timeline is 1 to 100 frames, you can test it by putting s10 at the end of time value - 0to100s10. Once the test is rendered, you can then resume the job to render full range in the web dashboard without the need to upload the scene again. 

Also, please keep in mind that when rendering with still image - bake and render mode, you can only use single frame values.

Camera and render range setup

Note

Our 3ds Max plugin automatically checks your scene’s time setting and will not allow you to put in any frame number other than the scene timeline. For example, if your timeline starts at frame 10, you won't be able to input frame 0 in the plugin.

At the bottom of the plugin you can set additional farm render options. 

Overwrite ext switch allows you to switch your already set output format to a new one. By default, your format is read from your scene, however, if you still want to change it, you can do it by ticking Overwrite ext switch and then selecting your desired format from the list.

Note

Turning on Overwrite extension switch will force the output format to save with default settings. So, for example, if you are using some internal settings for output (like TIFF48bit with alpha or similar setups for .exr outputs) we strongly suggest leaving the Overwrite ext switch off.

Next are additional output switches, used for output saving options:

  • save render elements separately - which will work only with multi-layer-output files (like EXR/CXR/FXR). This switch will force Corona to save all render elements as separate files instead of one-multi-layer output file. This switch solves 3ds Max & Corona multi-layer saving issues
  • render elements in separate directories - will force our render nodes to save each render layer in separate directory

The last option is New project name. This option should be used only when you’re working on a new scene (with new assets) from the same project directory. Otherwise, please leave this switch OFF. With this switch inactive, our plugin will not reupload any previously uploaded assets linked to the project.

Additional render settings - used only for farm rendering

Once everything is set just hit the “Send to the farm” button.

Note

You should always run a test job first prior to rendering a full range animation or full resolution still image to check for potential issues and to get an estimated job cost. For animations, try to render a shorter range or use step. For still images, you should render a smaller resolution job (i.e. ⅕ res). This is a very important step to follow which will help you fully test the service without potentially overspending your credits. To get a preliminary cost estimation, use our Cost Calculator. While this is only a rough number and it shouldn’t replace the actual testing, it’s a quick way to get a cost and render time estimate for animations (it doesn’t work for stills).

6. Use the plugin - additional settings for 3ds Max plugin

Our plugin has additional settings that allow you to adjust your rendering workflow and experience.

To check and set your preferred settings for our 3ds Max plugin, you need to click the "Settings" button in the top right.

Plugin settings - additional settings for 3ds Max plugin

In the settings window, you will find options such as:

  • Show confirmation prompt after preparing the scene - by default, this option is always turned on. When our plugin completes the process of preparing a project, it displays a prompt that the renderBeamer application has started uploading the project files.

If you want the scene to reload automatically without being prompted everytime, turn off this option in the settings.

  • Upload original Max scene for Vrscene - this option refers to the “send as .vrscene” setting available in the plugin submit window (for projects with the 3ds Max + V-Ray setup). When enabled, our plugin will upload the .max file together with the .vrscene whenever “send as .vrscene” is used. By default, this option is disabled to skip the unnecessary transfer of a .max file.
  • Render Stereo V-Ray as a separate job - when you use "V-Ray Stereo Camera" in the scene, by default our plugin splits the main view into two separate jobs - the left view and the right view. This setting allows you to render your project in an optimal way (each view on a separate node). If you need to get one main view from the stereo camera, without splitting it into two separate views, you need to uncheck the box.
  • Select .anipack file manually - by default, our plugin will automatically handle Anima assets and export the necessary files to .anipack, but in exceptional cases when such a workflow does not work automatically, it is recommended to enable this option. When enabled, in the process of collecting all the assets and preparing the scene for upload, our plugin will ask you to select the .anipack file which will be used to render the project.

7. Upload the project

Once our plugin completes the scene export, your project will be redirected to renderBeamer to be uploaded. In a nutshell, renderBeamer is a standalone uploader/downloader application that works in conjunction with our plugins. Simply put, it takes care of the file transfers. 

After the scene has been fully uploaded, the app will show you a window with a direct link to your scene on Web Manager (web dashboard). To continue, use the click here to submit job button. If for some reason, you closed the window with the link or it didn’t work, don’t worry, you can locate your project in the web dashboard and submit your scene by clicking on the scene file any time (more on that in the next step). You can also copy the link to the clipboard and manually paste it into your web browser.

renderBeamer window with upload confirmation and a link to add the job to render farm

8. Submit the job (add the job to the render queue)

Now that your project is uploaded you will need to follow the final step - creating and submitting a job to render farm. Web Manager is a home to all your projects and render jobs. 

If you followed the link generated earlier by renderBeamer, you will now see the job submission window with several fields and settings. If you didn’t follow the link or it didn’t work, you can do it manually by locating your project in the projects panel, finding the scene file within the project folder (in your folder structure look for the folder called “data”, i.e. Project_name/data/SceneName.max), and clicking on it to open the job window.

creating a job directly from the Web Manager file browser

Our system automatically detects your settings in the scene and uses them to render the job. Before submitting the job to the render queue, please make sure that everything is correct and make adjustments if necessary.

job settings: frame range, resolution, aspect ratio, bucket size

Frame range -  use this field to put in the frame range you want to render. Frame range example for animations: 1to740s1 - this is a sequence of 740 frames in total and all the frames 1 to 740 will be rendered. The parameter "s1" means that every subsequent frame in the given range will be rendered. If you want to do a test first, set a higher s value, e.g. "s20", which will result in every twentieth frame in the animation range to be rendered. So if you set the range to 1to740s20, then the frames 1,21,41,61,81,101,...,741,761 will be rendered.

If you have multiple cameras in your scene and you’d like to modify the frame range for all of them at once, you need to tick the checkbox to enable the frame range field.

If you only want to render a single frame (still image), you should input a single frame number into the field. For example, 1  will render the frame number 1.

Resolution - here you can set the output resolution in pixels.

Aspect ratio lock - if you need to change the resolution and want to keep a certain aspect ratio, you can use one of the available presets: 4:3; 16:9; 16:10; 21 9; 1:1. Leaving the option as "none" means that you are free to modify the values for the "Resolution" ignoring the aspect ratio.

Note

NOTE | If you are going to render an animation or a still image, we always recommend that you perform a test before the final rendering:

  • For animations, the best way to get a cost estimate is to run a test of the scene on the farm with around 20 frames spread evenly across the range. For example, a frame range 1to200s20 will render every 20th frame as a test and based on that our system will produce a cost estimate for the full render.
  • For stills, please render the image in 1/5 resolution or any other smaller resolution. In the case of 1/5 resolution test, the cost of full resolution render will be 25 times bigger than the cost of a test. For example, if you want to render an image in resolution 5000x6000, run a test in 1000x1200 res first. If your test costs $1, then the estimated cost for the full res image should be around $25 (5 x 5 = 25). For a 1/4 test it would be $16 (4 x 4 = 16) and so on.

There's more information about running tests and estimating the cost in our documentation.

TIP

If you are going to render a still image in high resolution and your scene does not contain any post-production effects, then it’s recommended to use "Strips" mode in our plugin to speed up rendering by using multiple nodes simultaneously (see more info below).

job settings: output path/name, file extension

Output path - here you can find the default save path for rendered frames in the given job. The default output path is based on the name of your project and scene. You can edit this path if you clone your job and need to render a different range in that project.

Output file (w/o ext) - by default, the frames file name is set based on the name of your scene. If you want to create a unique name and/or you need to customize naming for the output according to your pipeline, you can set your own name for the output file.

Extension - a format for the main output file is the same as in your scene settings. However, if you want to change the extension to a different one, you can choose from the available options, i.e: BMP, CIN, EPS, PS, EXR, FXR, HDR, PIC, JPG, JPE, JPEG, PNG, RGB, RGBA, SGI, INT, INTA, BW, RLA, RPF, RGA, TGA, VDA, ICB, VST, TIF, VRIMG, DDS, CXR.

job settings: priority, version, retries

Priority - before adding a job to the render queue, you can decide how you want to prioritize it. Depending on the queue and farm traffic, a higher priority may allow your job to quickly acquire nodes to render your project faster. Each priority has a different rate and gives you a different number of nodes - a detailed list can be found here: https://garagefarm.net/pricing 

Version - by default, the version of 3ds Max is set to the same version you have uploaded the project with. However, if you need to use a different version of 3ds Max than the one detected, you can choose a specific version available on the list.

Retries - the value for this option is set to 5 by default. This means that if a rendering process fails or the software crashes, our system will perform five additional rendering attempts. We recommend leaving this option set to default (value 5) as this is the optimal setting to retry rendering in the case of some random 3rd party software errors.

job settings: preferred hardware

Preferred hardware (node groups) - by default, the system sets the preferred hardware to nodes with 62GB RAM. As we render Corona projects on a CPU device, you can switch the node group button to a custom setup and select the particular group of nodes either based on CPU cores or RAM:

  • CPU - based on the CPU device you can select between a group of nodes based on the minimum amount of RAM available or the CPU type:
    • RAM preference: Min. 62GB RAM; Min. 121GB RAM
    • CPU preference: Intel Xeon v4 / 22cores, Intel Xeon v4 / 44 cores, AMD Epyc 3gen / 32 cores
custom hardware setup: node groups available for CPU

The full technical specification of nodes can be found here: https://garagefarm.net/pricing#specs

TIP

If you know that your scene requires more than 62GB RAM, then when adding a job to the queue select the group with 121 GB RAM or more to render more optimally only on nodes that have more RAM.

job settings: advances settings

Advanced settings

  • Job dependencies - if you want this job to start rendering after finishing another job that is in the queue, you can select it here. As a result, the current job will not start until the selected dependency job has finished.
  • Custom node version - if you need a different software setup (e.g. custom software version), put here the value you received from our support. Note that inputting a wrong number may cause errors during rendering. 
  • Custom script - if your job requires a modified environment or adding a custom script (prepared by our support team), e.g. custom plugin installation, select the available script from the list.

Note

The advanced settings above are empty by default, please do not modify them without consulting support first.

<
job settings: mede switch (cameras / scene states)

Mode - depending on whether you want to render particular cameras or scene states in your scene, you can select either mode using the dropdown menu.

Cameras - in this part of the submit window (cameras list) you can select all the cameras that you want to render, and you can also set an individual frame range for each camera. Each selected camera will be added to the queue and rendered as a separate job.

In case you do not select any of the cameras from the list, then the camera selected in the scene will be used as the default camera for rendering.

job settings: scene states (states list)

Scene states - If your scene contains scene states, our plugin automatically detects them and forwards all states settings along with the job upload. You can render scene states by switching the mode to “Scene states” (instead of cameras).

For each state, you can set an individual camera and range of frames. Each selected state will be added to the queue and rendered as a separate job.

Mode switched to “Scene states”. You can still edit cameras and render range - directly on Web Manager, without the need to reupload the scene. Also, if you still want to render just a camera - you can switch the mode back to “Cameras”.

job settings: max subdivs, noise threshold

When you add a scene to the queue, these values for Pass limit and Noise limit are read from the render settings in your scene. You can modify them if you want to get a higher quality output. Also, alternatively, you can perform a test with a lower quality to see if given objects are rendered correctly. Both values have a switch that when disabled allows you to always use the scene settings without overwriting the values (set in the web dashboard). This switch is useful when you want to clone a job but are not sure what the original settings were when you uploaded the scene.

Pass limit - if you need to increase or decrease the number of samples taken for each pixel, you can do it by changing the value in this field.

Noise limit - The value of sampling a pixel is set to the same you have in your render settings. You can adjust the value to a lower or higher one. According to Corona documentation, the typical values should be in the range from 0.001 to 100. Our system allows to put values from 0 to 10000.

job settings: gamma correction (gamma value in/out)

Gamma correction - our plugin reads your settings for gamma correction and automatically turns it ON when it detects it in your scene, while keeping the values for gamma in/out. In case you want to adjust these settings, you can do so by putting values into the fields, then the modified values will be used during rendering. Also, you can disable the gamma correction option altogether by unchecking the checkbox.

job settings: render frame window, job node limit

Render frame window - This option is equivalent to "frame buffer preview" in 3ds Max. When this option is enabled, you will be able to check the progress of rendering from 3ds Max's frame buffer window during rendering. By default, the "Render frame window" option is enabled for jobs with 3ds Max + Corona.

Job node limit - by default, the value for this option is empty and so the nodes are assigned automatically depending on the job priority and nodes availability on the farm. Nevertheless, if you want to limit the number of nodes for the given job, please put here the value of the maximum number of nodes you want to be used during rendering.

job settings: pixel aspect, render elements, continue on error

Pixel aspect - These settings are read from your settings in 3ds Max. You can adjust them here to fit the requirements of your output device, without the need to re-upload the scene.

Render elements - Our system automatically detects whether additional outputs (render elements) are set in your scene, and then it enables this option. In case you do not want to render additional render elements (despite the settings in the scene), you can disable this switch, then none of the additional outputs will be rendered or saved.

Continue on error - By default this switch is turned ON. This means that any error messages related to missing textures and other assets will be skipped. The calculations will continue and rendering will not be aborted. If you disable this option and, let’s say, your scene contains missing asset, rendering will not be possible and the process will fail.

job settings: strips

Strips - If you upload your scene using the "Strips" mode (in our plugin), then in the web dashboard you will have a visible additional option for strips.

The number of strips that is available depends on the scene resolution. By default, we set the number of strips you selected while submitting the scene via our plugin.

If you drop down (in the web dashboard) the list of available strips, you can see the "recommended" value for one of options.

The recommended value is calculated automatically by our system and it is the most optimal value as far as the cost and speed are concerned.

You can select any number of strips based on your preferences and needs. For example, you might want to choose more strips if you prefer speed over cost. Other time, fewer strips may be a viable option if you know that the scene loads a long time and the cost is your primary concern.

job settings: fpe (frames per execution)

Frames per execution - this option is only available for animations. By default, the value for FPE is set to 1 for projects rendered on CPU. This means that each frame will be rendered as a new execution (a separate task), in other words, the scene will be loaded on each node every time a new frame starts. 

The FPE (Frames Per Execution) option allows you to render several frames (the value you put in) in a row without the need to reload the scene on a render node, and potentially may improve rendering efficiency. If your scene has a long loading time but a short rendering time, you can set FPE to a higher value (for example 4). If the loading time is not long but the rendering time is long, leave the default value or set it to 1.

Detailed information on the use and examples of the FPE option in practice can be found in our dedicated guide: https://garagefarm.net/documentation/how-to-use-and-optimize-frame-per-execution-fpe

job settings: paused state, submit & cancel button

Add job as paused - if you tick this option and then submit your job, it will be added with the status “paused”. This means that it will not start rendering automatically. It is useful to use this option if you intend to add the job to the queue, but you do not intend to render it at the moment. After adding a "paused" job, you can resume it at any time by selecting the "resume job" option (right-click on the job).

Submit - when you press this button, the system will immediately add the job to the render queue. Please remember to check all settings before submitting a job!

Cancel - if you do not want to add the current job to the render queue or you want to reset your settings and add the scene again, you can use this option. The submission window with the settings for the given job will be closed and all changes will be cancelled.

switch for enabling the “Create video sequence from output frames” option

Create video sequence from output fram - You can create animated video outputs right after rendering frames. Select “Create video sequence from output frames” switch and set all desired video output settings. With the switch ON, the farm will run an additional job to render the frames sequence to a single video output.

additional job settings: Create video sequence from output frames

More info about the settings available in the "video sequence job" you can find in our dedicated article.

9. Monitor render progress

After giving your render settings a final check and choosing your preferred priority, hit Submit to add your job to the render queue. If you’re a first-time user, you will have received $25 worth of credit to test out our service. The credits should be enough to run a few test jobs and familiarize you with the service.

TIP

You can right-click on the job to get additional options: change priority, pause job, kill job, and archive job.

Note

The estimate is based on the currently finished frames and is approximated at that point. Rendering a test as prompted in the plugin (using a step i.e. 1to100s10) is highly recommended for more accurate estimates and detecting potential errors.

<
Jobs added to render queue and options available under the right mouse button

When the job has started rendering, you can check the real-time progress of currently processed frames. To do that, just select the render job from the main project list and click the arrow on the top right side to open the panel that shows jobs progress details.

Web Manager progress panel showing currently rendering frames

The Job Details (the panel on the right side of the screen) will show its content only when any of the jobs is selected. The panel is divided into 3 sections. 

Active frames - it shows currently rendering frames. When a frame finishes, it is moved to the second section, Done frames. If you select any frame in the Done frames list, you can then access the render output process log in the bottom section called Process results.

TIP

When you’re in the Job Details panel and right-click on any of the currently rendering frames in the “Active frames” section, you can access the real-time render log from our nodes.

Note

Please remember that if a job has finished rendering, the frames list in the “Active frames” section will be empty because all frames are already rendered, and the list is moved to “Done frames”.

<
Real-time render log from our node accessible in the “Active frames” section under RMB

For all jobs in 3ds Max, you can check the current progress from the frame buffer preview. Just click on the icon next to "show progress" option to open the window with the current progress for one of the first active frames from the active frame list.

You can also select a preview for any particular frame directly by clicking on the "show preview" option in the active frame list.

10. Download and review frames

Each frame completed rendering is downloaded automatically to your local drive to a directory you selected in the renderBeamer application. If you’re unsure where your download folder is located, you can double-check it or change it in renderBeamer’s settings (click on the cogwheel). Also, ensure you have auto download turned on to get the frames downloaded as soon as they are available. If this box is unchecked, you will have to click on each job in Beamer's "downloads" tab, and manually download the frames.

renderBeamer default settings with auto download ON

If you prefer more control over what to download and when you can also download your frames manually. To do that, just turn off the auto download switch in renderBeamer settings and go to the “downloads” tab. Next, select the desired render output using a checkbox, and click the download button.

renderBeamer downloading frames for a selected render job

This workflow will download all rendered frames for the selected job or jobs. However, renderBeamer also gives you an option to download individual frames. You need to use the list files function under RMB to do that.

renderBeamer listing files option for selected render job

Once files for the selected job are listed, just roll down the list and select the files you’d like to download using checkboxes. Next, use the same download button.

renderBeamer downloading only selected frames from a render job

Once your frames are downloaded, you can use the “open directory” option under RMB to open the folder where frames are saved.

Note

Please ensure you keep renderBeamer running whenever you have jobs rendering to get the frames downloaded immediately. It may happen, however, that your frames aren’t downloading at the given moment. It’s likely because our application syncs the files in 15-minute cycles, and it is currently in between the cycles. You can click refresh to force the application to sync.

11. Purchase credits

You’ll need to charge your account to continue using the service when you use up all your trial credits. Please note that when your balance goes below $0, you won’t be able to download rendered frames or start new render jobs. You can make payments in the Billing panel in Web Manager. We accept debit cards, credit cards, PayPal and DotPay payments. Also, you can purchase credits via Revolut or Zen.

If your rendering needs are high or you plan to render regularly, please make sure to check out our volume discounts.

billing panel where you can buy credits, view cost & payment history, and view discounts

Note

In case your account balance goes below 0, any current jobs will be paused - all frames/strips that were in the middle of rendering will be completed but any subsequent frames/strips will not start rendering. To download rendered frames, your account balance must be positive or equal to $0.

12. Contact us anytime

You can talk to GarageFarm.NET’s tech team any time of the day, any day of the week. We’re here to help you get started, answer your questions, and assist you in any way. Don’t hesitate to give us a shout.

You can contact us through our live chat accessible in the web dashboard or our desktop app when you log in to your account or message us here through the guest chat.

3ds Max Corona
live chat